How would you determine the quality of your replica watch?
Lets say you just purchased a
Replica Omega SeaMaster watch from a top Google ranking Website. You paid around $200 and it took approximately two agonizing weeks to receive. Upon opening the raggedy brown box shipped from China Appears your watch. Hopefully it was tightly wrapped and secure. Below are the first 5 aspects you should look at to determine the quality of the replica watch.
~ First you want to look for any debris on the face. Check the metal for Scratches, or obvious damage. The watch should have clean fonts, and lines.
~ Second you want to do a tap test. Using a coin, tap the top of the crystal. A good crystal should have a solid tapping sound. A not so good crystal will sound more hollow, and fragile. You can also check for crystal coloration. A Pink tint in the crystal is a Sapphire crystal, and a blueish tint is mineral crystal. Keep in mind that their are several different grade of Sapphire and Mineral. Some mineral crystal may be stronger then a low grade sapphire crystal. So use the Tap Test.
~ Third you should Listen to the movement. what you are looking for is smooth action when unscrewing the crown and it pops out. Do all the gears properly pop into place, Or do you have to wiggle it around to get set? A descent quality movement should wind very smoothly. It should have zipping sound. The finer the zipping The more bpp, Which gives a finer sweeping second hand. Genuine Swiss ETA movements will have the caliber and Swiss made stamped on the shoulder of the movement.
~ Fourth look at the clasp. Make sure that everything is smooth, with no rough edges. the buckle should open and close with ease. If you are unfamiliar with the style of deployment, you may need to get used to opening and closing the new replica watch. Ultimately you want to ask yourself, will this watch clasp last opening and closing for years? Really it all depends on how you operate it, but low grade quality replica watches will function poorly.
~ Five Check the weight of the watch.
The replica Omega Seamaster watch should weigh about 6 Oz. A low quality replica watch will weight around half that. Weight of the replica watch is very important and should be correct of its materials. Obviously a rubber band Omega will not weigh as much as an all metal band replica Omega watch.
Their is a lot of junk out there so be careful. If you see the same image of the Omega Seamaster replica watch on several different sites, they are probably a scam site. Only buy from replica watch websites that take their own images of the watches.
See how this sapphire crystal holds up to the HAMMER TEST.
http://www.youtube.com/watch?v=VCvhpbrY4D4&feature=related